Fredenslund workshop tools
v1.0.10MFT/3 hole patterns (Shaper-ready SVG) and French cleat wall plans with cut lists. Free, unofficial.
Endpoint health
online- Last checked
- 11/20/2026, 9:16:35 AM
- Latency
- 62 ms
- Consecutive failures
- 0
- Endpoint reachable: pass
- Protocol valid: pass
- MCP handshake valid: pass
Machine-readable profile
mcp-server · schema v1 · callable
mcp-server:io.github.afredenslund%2Ffredenslund-workshop-tools
Connect this server
Generated config contains no credentials. Keep any required secrets in your client's local environment.
{
"mcpServers": {
"io.github.afredenslund/fredenslund-workshop-tools": {
"url": "https://fredenslund.dk/mcp"
}
}
}Indexed tools
Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.
2 shown · authentication unknown
French cleat wall plan
french_cleat_plan
Plan a French cleat wall for a workshop with the Fredenslund cleat system: 90 mm cleat boards and 90 mm gaps (180 mm pitch), hook plate 72 mm including 12 mm material, 30 mm buffer between hangers, a 900 mm table that hangs on its own cleat one hook lower (cleat top 840) with the rows following that cleat, top cleat at least one gap below the ceiling, lowest cleat at least 210 mm above the floor (its underside; rows 300 … 2280 on the default wall). A hanger comes off by lifting it the material + 3 mm, so the hook plate is at most the gap − 3 and the top cleat at least the hook plate + 3 below the ceiling. The default wall is a full plywood sheet, 1220 × 2440 mm. Give the wall size and the hangers to hang (hooks, shelves, boxes, panels: left edge, the cleat row it hangs on, width, extra rows spanned below — a shelf usually spans one row). Returns the cleat rows (cleat top heights from the floor), every hanger with its panel height and whether it fits — and why not (row missing, row off, outside wall, collision) — the cut list with cleat metres, wall coverage, a picture of the wall (a link to a 1200 × 630 PNG) and a link that opens the same plan editable in the tool. All values in mm. Call with no hangers to get the rows for a wall first. Beta.
Schema valid · SHA-256 10ad7a79a9cd…
View input schema
{ "type": "object", "properties": { "wall_width_mm": { "type": "integer", "description": "Wall width in mm (200–8000, default 1220 — a full plywood sheet)", "default": 1220, "minimum": 200, "maximum": 8000 }, "wall_height_mm": { "type": "integer", "description": "Wall height in mm (300–4000, default 2440 — a full plywood sheet)", "default": 2440, "minimum": 300, "maximum": 4000 }, "hangers": { "type": "array", "description": "Hangers to place. Each hangs on one cleat row, given by the height of that cleat's top edge from the floor", "items": { "type": "object", "properties": { "x_mm": { "type": "integer", "description": "Left edge, mm from the wall's left edge (x + width at most 8000, the widest wall)", "minimum": 0, "maximum": 7990 }, "cleat_top_mm": { "type": "integer", "description": "Height from the floor of the top edge of the cleat the hanger hangs on; must be one of the wall's rows (300, 480, 660, 840, 1020, 1200 … 2280 with default settings)", "minimum": 0, "maximum": 4000 }, "width_mm": { "type": "integer", "description": "Width in whole mm (the planner drags in 10 mm steps; the palette sizes are 50–550)", "minimum": 10, "maximum": 8000 }, "rows_below": { "type": "integer", "description": "Extra cleat rows spanned below the hook row (0 = one cleat; each adds one pitch, 180 mm, to the panel height). Typical: hooks 0; shelves and boxes 1 (a shelf hangs on its row and rests on the cleat below); deep boxes and panels 2; tall panels 3", "default": 0, "minimum": 0, "maximum": 49 }, "extension_mm": { "type": "integer", "description": "Extra panel length below the lowest cleat, mm (default 0)", "default": 0, "minimum": 0, "maximum": 4000 }, "name": { "type": "string", "description": "Optional name shown on the drawing and in the cut list (max 40 characters)", "maxLength": 40 } }, "required": [ "x_mm", "cleat_top_mm", "width_mm" ], "additionalProperties": false } }, "rows_off": { "type": "array", "description": "Cleat rows to switch off, by cleat top height from the floor", "items": { "type": "integer", "minimum": 0 } }, "system": { "type": "object", "description": "Override the Fredenslund system (all in mm). Leave out to use the defaults", "properties": { "board_mm": { "type": "integer", "description": "Cleat board height (default 90). The gap equals the board unless gap_mm is given", "minimum": 40, "maximum": 200 }, "gap_mm": { "type": "integer", "description": "Gap between cleat boards (default = board_mm, as in the Fredenslund system); pitch = board + gap", "minimum": 40, "maximum": 200 }, "hook_plate_mm": { "type": "integer", "description": "Hook plate incl. material (default 72); at most the gap − 3, so a hanger can be lifted off", "minimum": 20, "maximum": 120 }, "material_mm": { "type": "integer", "description": "Material thickness (default 12)", "minimum": 3, "maximum": 40 }, "buffer_mm": { "type": "integer", "description": "Buffer between hangers and above the floor (default 30)", "minimum": 10, "maximum": 200 }, "table_height_mm": { "type": "integer", "description": "Table height — the top of the table (default 900). The table hangs on a cleat table_offset_mm lower, and that cleat anchors the rows", "minimum": 0, "maximum": 2000 }, "table_offset_mm": { "type": "integer", "description": "How far below the table height the table's own cleat has its top edge (default 60 = hook plate − material, so the tabletop hangs like a hanger; 0 makes the table height the top of a cleat)", "minimum": 0, "maximum": 1000 }, "top_clearance_mm": { "type": "integer", "description": "Clearance below the ceiling (default = the gap, 90); at least the hook plate + 3, so a hanger on the top row can be lifted off", "minimum": 0, "maximum": 4000 }, "bottom_limit_mm": { "type": "integer", "description": "The lowest cleat keeps its underside this far above the floor (default 210)", "minimum": 0, "maximum": 2000 }, "tip_trim_mm": { "type": "integer", "description": "Tip trim taken off the 45° bevel (default 1); changes finished sizes only", "minimum": 0, "maximum": 5 } }, "additionalProperties": false } }, "additionalProperties": false }
Connections
streamable-http
https://fredenslund.dk/mcp