calc.engineer
v1.0.088 free engineering calculators: RF link budgets, LoRa/Meshtastic, PCB, solar, homelab. Keyless.
Endpoint health
online- Last checked
- 11/20/2026, 3:18:19 AM
- Latency
- 647 ms
- Consecutive failures
- 0
- Endpoint reachable: pass
- Protocol valid: pass
- MCP handshake valid: pass
Machine-readable profile
mcp-server · schema v1 · callable
mcp-server:engineer.calc%2Fcalc
Connect this server
Generated config contains no credentials. Keep any required secrets in your client's local environment.
{
"mcpServers": {
"engineer.calc/calc": {
"url": "https://calc.engineer/mcp"
}
}
}Indexed tools
Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.
25 shown · authentication unknown
attenuator pi
attenuator_pi
Design a Pi-topology resistive attenuator pad. Given a desired attenuation in dB and characteristic impedance (default 50 ohm), computes the three resistor values for a symmetrical Pi-pad network. The Pi attenuator uses two shunt resistors (R1, R3) and one series resistor (R2). Commonly used in RF signal chains to reduce signal level while maintaining impedance match. Compare with attenuator_tee for T-pad topology.
Schema valid · SHA-256 ce67a2b59a23…
View input schema
{ "type": "object", "properties": { "attenuation_db": { "type": "number", "exclusiveMinimum": 0, "description": "Desired attenuation in decibels (positive value)" }, "z0_ohm": { "type": "number", "exclusiveMinimum": 0, "default": 50, "description": "Characteristic impedance in ohms (default 50)" } }, "required": [ "attenuation_db" ], "additionalProperties": false, "$schema": "http://json-schema.org/draft-07/schema#" }attenuator tee
attenuator_tee
Design a Tee-topology resistive attenuator pad. Given a desired attenuation in dB and characteristic impedance (default 50 ohm), computes the three resistor values for a symmetrical T-pad network. The Tee attenuator uses two series resistors (R1, R3) and one shunt resistor (R2). Commonly used in RF signal chains to reduce signal level while maintaining impedance match. Compare with attenuator_pi for Pi-pad topology.
Schema valid · SHA-256 e1541d4437fb…
View input schema
Connections
streamable-http
https://calc.engineer/mcp