Toolbox POD
v1.0.1Design custom shirts and hoodies, make mockups, publish to Shopify or WooCommerce, and order prints.
Endpoint health
online- Last checked
- 11/20/2026, 6:16:04 AM
- Latency
- 344 ms
- Consecutive failures
- 0
- Endpoint reachable: pass
- Protocol valid: pass
- MCP handshake valid: pass
Machine-readable profile
mcp-server · schema v1 · callable
mcp-server:com.toolboxpod%2Fmcp
Connect this server
Generated config contains no credentials. Keep any required secrets in your client's local environment.
{
"mcpServers": {
"com.toolboxpod/mcp": {
"url": "https://mcp.toolboxpod.com/mcp"
}
}
}Indexed tools
Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.
24 shown · authentication unknown
Approve a design for printing
activate_design
Approve a design for printing so it can be ordered (its print files go to production). First show the person the design (get_mockup) and ask; call this only after they say yes. Owner or Manager only; free.
Schema valid · SHA-256 dcd0a677a211…
View input schema
{ "type": "object", "properties": { "designId": { "type": "string", "minLength": 1, "maxLength": 80 }, "acknowledgment": { "type": "object", "properties": { "specificationHash": { "type": "string", "minLength": 1, "maxLength": 200 }, "warningsHash": { "type": "string", "minLength": 1, "maxLength": 200 }, "rightsStatement": { "type": "string", "maxLength": 2000 } } } }, "required": [ "designId" ], "$schema": "https://json-schema.org/draft/2020-12/schema" }Create a design
create_design
Make a NEW design: uploaded artwork placed on the front and/or back of a garment. To show or order a design that already exists, find it with list_designs first; don't create a new design for the same artwork. Ask the person what to call it (title) and list every warning code in acknowledgedWarnings. A new design is not approved for printing until activate_design.
Schema valid · SHA-256 00f3a344edbf…
View input schema
{ "type": "object", "properties": { "garment": { "type": "string", "minLength": 1, "maxLength": 40, "description": "A garment code: GD64, CC17, LS14, or one stocked for this account alone (list_garments lists every one it can use)" }, "title": { "description": "The merchant's name for the design", "type": "string", "maxLength": 120 }, "front": { "type": "object", "properties": { "artworkId": { "type": "string", "minLength": 1, "maxLength": 80 }, "placementModel": { "description": "collar-v1 = placed by the collar with an optional adjust; hem-v1 = Low hem (preset low-hem); omitted = a print-area placement.", "type": "string", "enum": [ "print-area-v1", "collar-v1", "hem-v1" ] }, "placement": { "description": "print-area-v1 only: size and position in inches inside the print area.", "type": "object", "properties": { "widthIn": { "type": "number" }, "heightIn": { "type": "number" }, "topOffsetIn": { "type": "number", "description": "Inches from the top of the print area" }, "centerXIn": { "type": "number", "description": "Inches from the center line; 0 = centered" } }, "required": [ "widthIn", "heightIn", "topOffsetIn", "centerXIn" ] }, "adjust": { "description": "collar-v1 only; omit for the rule as is.", "type": "object", "properties": { "dxIn": { "description": "Inches; + = right", "type": "number" }, "dyIn": { "description": "Inches; + = down, away from the collar", "type": "number" }, "scale": { "description": "Fraction of the rule's size, above 0 and at most 1", "type": "number" }, "align": { "description": "box = true center, visual = ink-weighted center", "type": "string", "enum": [ "box", "visual" ] } } }, "preset": { "description": "Print position instead of adjust, e.g. left-chest. low-hem: Low hem, only on accounts that have it turned on: a small print just above the bottom hem (the LS14 hoodie: low on the front pocket), front only, nothing else to send.", "type": "string", "enum": [ "full-front", "left-chest", "full-back", "low-hem" ] } }, "required": [ "artworkId" ] }, "back": { "type": "object", "properties": { "artworkId": { "type": "string", "minLength": 1, "maxLength": 80 }, "placementModel": { "description": "collar-v1 = placed by the collar with an optional adjust; hem-v1 = Low hem (preset low-hem); omitted = a print-area placement.", "type": "string", "enum": [ "print-area-v1", "collar-v1", "hem-v1" ] }, "placement": { "description": "print-area-v1 only: size and position in inches inside the print area.", "type": "object", "properties": { "widthIn": { "type": "number" }, "heightIn": { "type": "number" }, "topOffsetIn": { "type": "number", "description": "Inches from the top of the print area" }, "centerXIn": { "type": "number", "description": "Inches from the center line; 0 = centered" } }, "required": [ "widthIn", "heightIn", "topOffsetIn", "centerXIn" ] }, "adjust": { "description": "collar-v1 only; omit for the rule as is.", "type": "object", "properties": { "dxIn": { "description": "Inches; + = right", "type": "number" }, "dyIn": { "description": "Inches; + = down, away from the collar", "type": "number" }, "scale": { "description": "Fraction of the rule's size, above 0 and at most 1", "type": "number" }, "align": { "description": "box = true center, visual = ink-weighted center", "type": "string", "enum": [ "box", "visual" ] } } }, "preset": { "description": "Print position instead of adjust, e.g. left-chest. low-hem: Low hem, only on accounts that have it turned on: a small print just above the bottom hem (the LS14 hoodie: low on the front pocket), front only, nothing else to send.", "type": "string", "enum": [ "full-front", "left-chest", "full-back", "low-hem" ] } }, "required": [ "artworkId" ] }, "acknowledgedWarnings": { "default": [], "description": "Every warning code the artwork or placement raised", "type": "array", "items": { "type": "string", "maxLength": 80 } } }, "$schema": "https://json-schema.org/draft/2020-12/schema" }
Connections
streamable-http
https://mcp.toolboxpod.com/mcp