Timberr Framing Tools
v1.0.0Planning calculators for structural framing and building projects.
Endpoint health
online- Last checked
- 11/20/2026, 4:16:11 AM
- Latency
- 83 ms
- Consecutive failures
- 0
- Endpoint reachable: pass
- Protocol valid: pass
- MCP handshake valid: pass
Machine-readable profile
mcp-server · schema v1 · callable
mcp-server:com.timberrframing%2Ftools
Connect this server
Generated config contains no credentials. Keep any required secrets in your client's local environment.
{
"mcpServers": {
"com.timberrframing/tools": {
"url": "https://timberrframing.com/mcp"
}
}
}Indexed tools
Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.
14 shown · authentication unknown
Deck Joist and Beam Span Calculator
deck_joist_and_beam_span_calculator
Maximum deck joist span from Table 9.23.4.2.-A, the smallest built-up lumber beam from Table 9.23.4.2.-H for your post spacing, and the minimum post size from Article 9.17.4.1. of the 2024 Ontario Building Code. Source: 2024 Ontario Building Code (O. Reg. 163/24), Division B, Tables 9.23.4.2.-A and 9.23.4.2.-H, Articles 9.4.2.3., 9.4.2.2., 9.17.1.1. and 9.17.4.1., and SB-1 Table 2.
Schema valid · SHA-256 0d16098a2324…
View input schema
{ "type": "object", "properties": { "species": { "type": "string", "description": "Species group.", "enum": [ "SPF", "DFL", "Hem-Fir", "Northern" ], "default": "SPF" }, "grade": { "type": "string", "description": "Lumber grade.", "enum": [ "SS", "No1", "No3" ], "default": "No1" }, "size": { "type": "string", "description": "Joist or rafter size (38 mm thick).", "enum": [ "2x4", "2x6", "2x8", "2x10", "2x12" ], "default": "2x10" }, "spacing_mm": { "type": "integer", "description": "Spacing on centre (12, 16 and 24 in are also accepted). Unit: mm.", "enum": [ 300, 400, 600 ], "default": 400 }, "support": { "type": "string", "description": "Joist bridging and strapping (Table 9.23.4.2.-A).", "enum": [ "strapping", "bridging", "both" ], "default": "strapping" }, "span_ft": { "type": "number", "description": "Joist clear span in feet (or use span_m). With a ledger on the house this is the distance from the ledger to the beam. Unit: ft." }, "span_in": { "type": "number", "description": "Extra inches added to span_ft. Unit: in.", "default": 0 }, "span_m": { "type": "number", "description": "Joist clear span between the ledger or beam on each side in metres, instead of span_ft. Unit: m." }, "other_side_span_ft": { "type": "number", "description": "Joist span on the far side of the beam, for a beam in the middle of the deck. Leave 0 for a beam at the edge. Unit: ft.", "default": 0 }, "post_spacing_ft": { "type": "number", "description": "Clear span of the beam between posts, in feet (or use post_spacing_m). Unit: ft." }, "post_spacing_m": { "type": "number", "description": "Beam span between posts in metres, instead of post_spacing_ft. Unit: m." }, "city": { "type": "string", "description": "Ontario city, to read the 1-in-50 year ground snow load Ss and rain load Sr from SB-1 Table 2. Leave empty and give ss_kpa and sr_kpa instead.", "enum": [ "toronto", "etobicoke", "north-york", "scarborough", "mississauga", "brampton", "vaughan", "markham", "richmond-hill", "aurora", "newmarket", "uxbridge", "bradford", "barrie", "oakville", "burlington", "milton", "caledon", "ajax", "whitby", "oshawa", "hamilton-below-escarpment", "hamilton-above-escarpment", "cambridge", "guelph", "kitchener", "waterloo", "bracebridge", "gravenhurst", "huntsville", "collingwood", "parry-sound" ] }, "ss_kpa": { "type": "number", "description": "Ground snow load Ss from SB-1 Table 2, used when city is empty. Unit: kPa." }, "sr_kpa": { "type": "number", "description": "Rain load Sr from SB-1 Table 2, used when city is empty. Unit: kPa.", "default": 0.4 } }, "required": [ "span_ft", "post_spacing_ft" ] }
Connections
streamable-http
https://timberrframing.com/mcp