Put every part from price_cart into one ply cart and get the link to finish the order on plyparts.com (shipping, payment, engineer review). Pass the same parts list. Nothing is charged here.
View input schema
{
"type": "object",
"properties": {
"parts": {
"minItems": 1,
"maxItems": 40,
"type": "array",
"items": {
"type": "object",
"properties": {
"template": {
"type": "string",
"enum": [
"plate",
"bracket",
"spacer",
"washer",
"box",
"tray",
"enclosure",
"tslot-bracket",
"tslot-plate",
"tslot-mount",
"tslot-cap",
"tslot-cover",
"tslot-panel",
"tslot-cable"
],
"description": "plate = flat plate with holes; bracket = L-bracket; spacer = spacer/standoff; washer; box = box with optional lift-off lid, sized by the inside; tray = open tray / bin / organizer sized by the OUTSIDE (width, depth, height), optional compartments; for T-slot aluminum extrusion (pick its profile): tslot-bracket = corner bracket, tslot-plate = joining plate, tslot-mount = mounting plate (bolts into a slot + the customer's own holes), tslot-cap = end cap / foot, tslot-cover = slot cover, tslot-panel = panel clip, tslot-cable = cable clip"
},
"width": {
"description": "plate/bracket: width (mm)",
"type": "number"
},
"depth": {
"description": "plate: depth (mm)",
"type": "number"
},
"thickness": {
"description": "plate/bracket: thickness (mm)",
"type": "number"
},
"cornerRadius": {
"description": "plate: outside corner radius, 0 = square; box: inside corner radius (mm)",
"type": "number"
},
"holePattern": {
"description": "plate: hole layout",
"type": "string",
"enum": [
"none",
"center",
"corners",
"grid"
]
},
"holeDiameter": {
"description": "plate: diameter of the pattern holes; bracket: hole diameter (0 = no holes) (mm)",
"type": "number"
},
"holeInset": {
"description": "plate, corner holes: distance from each edge to the hole center (mm)",
"type": "number"
},
"gridColumns": {
"description": "plate, grid: hole columns",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"gridRows": {
"description": "plate, grid: hole rows",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"screw": {
"description": "plate/bracket/tslot-mount: the screw the holes are for (ply sizes them; omit or custom = use holeDiameter)",
"type": "string",
"enum": [
"custom",
"M1.6",
"M2",
"M2.5",
"M3",
"M4",
"M5",
"M6",
"M8",
"M10",
"M12",
"#2",
"#4",
"#6",
"#8",
"#10",
"1/4",
"5/16",
"3/8",
"1/2"
]
},
"board": {
"description": "plate/tslot-mount: a circuit board whose mounting holes ply places from the maker's drawing (rpi5 = Raspberry Pi 5, rpi4b = Raspberry Pi 4 Model B, rpi3bplus = Raspberry Pi 3 Model B+, rpizero2w = Raspberry Pi Zero 2 W / Zero W, pico = Raspberry Pi Pico, rpicam = Raspberry Pi Camera Module 3 / v2, uno = Arduino Uno (R3 / R4), mega = Arduino Mega 2560, jetson-orin-nano = NVIDIA Jetson Orin Nano Developer Kit, esp32-devkitc = Espressif ESP32-DevKitC V4, esp32-s3-devkitc = Espressif ESP32-S3-DevKitC-1 (v1.1), xiao-esp32s3 = Seeed Studio XIAO ESP32-S3, heltec-v4 = Heltec WiFi LoRa 32 V4, heltec-v3 = Heltec WiFi LoRa 32 V3, esp32-cam = AI-Thinker ESP32-CAM, ipi-smarc-rb5 = ADLINK I-Pi SMARC RB5 (I-Pi SMARC Plus carrier), esp32-devkit-v1-30 = ESP32 DevKit V1, 30 pins (generic), esp32-38-wide = ESP32 38-pin board, wide with 4 holes (generic), esp32-38-narrow = ESP32 38-pin board, narrow (fits most copies)); also give width/depth (hole pattern + 12 mm), screw and, on tslot-mount, standoffHeight",
"type": "string",
"enum": [
"none",
"rpi5",
"rpi4b",
"rpi3bplus",
"rpizero2w",
"pico",
"rpicam",
"uno",
"mega",
"jetson-orin-nano",
"esp32-devkitc",
"esp32-s3-devkitc",
"xiao-esp32s3",
"heltec-v4",
"heltec-v3",
"esp32-cam",
"ipi-smarc-rb5",
"esp32-devkit-v1-30",
"esp32-38-wide",
"esp32-38-narrow"
]
},
"holeStyle": {
"description": "with screw: plain hole, screw threads into the plastic, counterbored, countersunk (flat head), hex nut pocket, or heat-set insert",
"type": "string",
"enum": [
"clearance",
"tap",
"counterbore",
"countersink",
"nut",
"insert"
]
},
"extraHoles": {
"description": "plate: holes at exact spots, x/y = hole center in mm from the plate's center",
"type": "array",
"items": {
"type": "object",
"properties": {
"x": {
"type": "number"
},
"y": {
"type": "number"
},
"diameter": {
"type": "number"
}
},
"required": [
"x",
"y",
"diameter"
]
}
},
"legA": {
"description": "bracket: base leg length (mm)",
"type": "number"
},
"legB": {
"description": "bracket: upright leg length (mm)",
"type": "number"
},
"innerRadius": {
"description": "bracket: inside corner radius (mm)",
"type": "number"
},
"holesA": {
"description": "bracket: holes in the base leg",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"holesB": {
"description": "bracket: holes in the upright leg",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"outerDiameter": {
"description": "spacer/washer: outside diameter (hex: across the flats) (mm)",
"type": "number"
},
"innerDiameter": {
"description": "spacer/washer: hole diameter, 0 = solid spacer (mm)",
"type": "number"
},
"height": {
"description": "spacer: height; washer: thickness (mm)",
"type": "number"
},
"shape": {
"description": "spacer/washer: round or hex; tslot-plate: L, T, X, straight or gusset",
"type": "string",
"enum": [
"round",
"hex",
"L",
"T",
"X",
"straight",
"gusset"
]
},
"innerWidth": {
"description": "box: inside width (mm)",
"type": "number"
},
"innerDepth": {
"description": "box: inside depth (mm)",
"type": "number"
},
"innerHeight": {
"description": "box: inside height (mm)",
"type": "number"
},
"wall": {
"description": "box: wall thickness (mm)",
"type": "number"
},
"lid": {
"description": "box: lid",
"type": "string",
"enum": [
"lift-off",
"none"
]
},
"floor": {
"description": "tray: floor thickness (mm)",
"type": "number"
},
"compartmentsX": {
"description": "tray: compartments across (1 = none)",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"compartmentsY": {
"description": "tray: compartments front to back (1 = none)",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"drain": {
"description": "tray: drain holes through each compartment's floor",
"type": "string",
"enum": [
"none",
"holes"
]
},
"drainDiameter": {
"description": "tray: drain hole size (mm)",
"type": "number"
},
"dripTray": {
"description": "tray: a drip tray it sits in (use with drain holes)",
"type": "string",
"enum": [
"none",
"yes"
]
},
"dripHeight": {
"description": "tray: drip tray outside height (mm)",
"type": "number"
},
"pattern": {
"description": "tray: design pressed into the outside walls",
"type": "string",
"enum": [
"none",
"fluted",
"hex",
"diamond"
]
},
"profile": {
"description": "T-slot parts: the extrusion (8020-10 = 80/20 10 series 1 in, 8020-15 = 15 series 1.5 in, m20 = 20 mm / 2020)",
"type": "string",
"enum": [
"8020-10",
"8020-15",
"m20"
]
},
"holes": {
"description": "tslot-bracket: bolts per leg (1–4)",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"span": {
"description": "tslot-bracket: one or two profiles wide",
"type": "string",
"enum": [
"single",
"double"
]
},
"gusset": {
"description": "tslot-bracket: side gussets",
"type": "string",
"enum": [
"sides",
"none"
]
},
"keys": {
"description": "tslot-bracket/mount/panel: alignment keys that sit in the slot",
"type": "string",
"enum": [
"yes",
"no"
]
},
"armA": {
"description": "tslot-plate: holes along the first arm",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"armB": {
"description": "tslot-plate: holes along the second arm",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"slotHoles": {
"description": "tslot-mount: bolts into the slot",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"slotOffset": {
"description": "tslot-mount: slot line from the plate's center, across (mm)",
"type": "number"
},
"plugDepth": {
"description": "tslot-cap: plug length into the slots (mm)",
"type": "number"
},
"centerHole": {
"description": "tslot-cap: hole to reach the end bolt",
"type": "string",
"enum": [
"yes",
"no"
]
},
"length": {
"description": "tslot-cover: length (mm)",
"type": "number"
},
"panelThickness": {
"description": "tslot-panel: panel thickness (mm)",
"type": "number"
},
"reach": {
"description": "tslot-panel: overlap onto the panel (mm)",
"type": "number"
},
"cableDiameter": {
"description": "tslot-cable: cable bundle diameter (mm)",
"type": "number"
},
"path": {
"description": "A file's ply path (from price_file)",
"type": "string"
},
"fileName": {
"type": "string"
},
"material": {
"description": "Material name or id, e.g. PLA, PETG, ASA, TPU (default PLA).",
"type": "string"
},
"color": {
"description": "Color name, e.g. black, white, red (default black)",
"type": "string"
},
"strength": {
"description": "Plastic parts only. Default balanced; strong for parts under load",
"type": "string",
"enum": [
"economy",
"balanced",
"strong",
"heavy"
]
},
"quantity": {
"description": "How many (default 1)",
"type": "integer",
"minimum": -9007199254740991,
"maximum": 9007199254740991
},
"process": {
"description": "fdm = plastic (default); resin = fine detail (miniatures, figurines, smooth looks)",
"type": "string",
"enum": [
"fdm",
"resin"
]
},
"units": {
"description": "Units of an STL/OBJ file, which doesn't say (default mm). Use in if the part comes out 25x too small.",
"type": "string",
"enum": [
"mm",
"in"
]
},
"sanding": {
"description": "Resin only: sanded finish",
"type": "boolean"
},
"coating": {
"description": "Resin only: coating (needs sanding)",
"type": "string",
"enum": [
"none",
"matte",
"gloss"
]
}
}
},
"description": "Every part in the cart (up to 40): a built part (template + sizes) or a file (path from price_file), each with its own material, color, strength and quantity"
},
"thumbs": {
"description": "Leave empty (the ply card fills in pictures).",
"type": "array",
"items": {
"type": "string",
"maxLength": 300000
}
}
},
"required": [
"parts"
],
"$schema": "https://json-schema.org/draft/2020-12/schema"
}