RotoSpider Layout

{
  "mcpServers": {
    "com.cuberithm.mcp/rotospider-layout": {
      "url": "https://mcp.cuberithm.com/roto/mcp"
    }
  }
}

Indexed tools

Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.

2 shown · authentication unknown

• check_mold_layout

  Check whether molds fit together on a rotational-molding machine arm. Every answer comes from the deterministic RotoSpider geometric layout engine: rotation-envelope and dead-height checks, pairwise mold-to-mold clearance, offset-arm riser selection, and ring arrangements for 3+ identical molds. It never returns a physically invalid layout. Args: molds: List of mold objects. Use one explicit unit convention: Box/frame mold: {"length_mm": L, "width_mm": W, "height_mm": H}. Cylinder/tank mold: {"diameter_mm": D, "height_mm": H}. Exact L, slope, triangle, frustum, or complex mold: measured length_mm+width_mm+height_mm plus the complete geometry_asset_id+geometry_asset_revision returned by the geometry WebAPI or another trusted publisher. Decimal-inch aliases are length_in, width_in, height_in, and diameter_in. Each value is converted once to canonical micrometres; do not give both aliases for the same value. Optional per mold: "name", "weight_kg", "quantity" (default 1; use 0 to retain the mold type without requesting a copy). machine: Public-sample straight-arm preset. Available models are listed in the tool description. Leave empty AND give no explicit geometry to scan all presets ("which machine can take these molds?"). arm_type: 'straight' (dual spiders) or 'offset' (single-spider offset/L arm). Empty = both. spider_diameter_mm: Custom machine - spider (mounting plate) diameter. Giving this plus envelope_diameter_mm switches to custom-machine mode instead of presets. envelope_diameter_mm: Custom machine - rotation envelope diameter (for offset arms: the vertical envelope diameter). dead_height_mm: Custom straight arm - unusable center height between the upper and lower spider surfaces. offset_spider_y_mm: Custom offset arm - spider Y offset from the spider center to the sphere center (required for custom offset). offset_horz_diameter_mm: Custom offset arm - horizontal usable envelope diameter after side trim (defaults to envelope). riser_heights_mm: Custom offset arm - available riser heights; the solver picks the best (or none). *_in: Decimal-inch aliases for the matching custom-arm and clearance *_mm arguments. max_load_weight_kg: Optional arm weight capacity; the solver loads molds only up to this total weight. clearance_target_mm: Target mold-to-mold clearance (default 300). clearance_min_mm: Minimum acceptable clearance (default 150). allow_overhang_within_envelope: Allow every mold shape to extend past the spider edge while its complete active shape remains inside the rotation envelope. Defaults to false. include_layout: Include request-relative mold placements. Use with response_api v1/v2/v3 to select the placement heading dialect. display_unit: 'mm' (default) or 'in'. Canonical result fields remain millimetres; 'in' adds a display projection rounded to 0.00001 in. response_api: Public placement dialect. Defaults to rotospider.layout-check.v1; request rotospider.layout-check.v2 for exact four-heading orient keys when layouts are included. Returns a summary sentence plus per-arm results: feasible, placed vs requested counts (per mold type when available), selected riser height, spider utilization, center-of-gravity offset, achieved clearance, and the engine's reason when molds do not fit.