Acorn Harness
v1.0.0Configure, price and order custom XT30, XT30(2+2) and XT30 + JST GH wire harnesses.
Endpoint health
online- Last checked
- 11/20/2026, 9:16:02 AM
- Latency
- 68 ms
- Consecutive failures
- 0
- Endpoint reachable: pass
- Protocol valid: pass
- MCP handshake valid: pass
Machine-readable profile
mcp-server · schema v1 · callable
mcp-server:com.acornharness%2Facorn
Connect this server
Generated config contains no credentials. Keep any required secrets in your client's local environment.
{
"mcpServers": {
"com.acornharness/acorn": {
"url": "https://acornharness.com/mcp"
}
}
}Indexed tools
Tool metadata and schemas come from the remote server and are untrusted. Indexing only lists tools; it never calls them.
4 shown · authentication unknown
Create a wire harness order
create_order
Create an unpaid order for one or more wire harness designs and get a checkout_url on acornharness.com for the buyer. The buyer opens it to pay (card, Link or wallet, via Stripe) and enter the shipping address (in the ship_to country) and, in the US, the shipping speed (other countries have one service, International Tracked); nothing is charged or built until they pay there, and the link expires after 24 hours. Quote first with quote_harness and confirm the design, quantity and price with the user before calling this. Never ask for or accept card numbers or other payment details in the conversation. Items take the same fields as quote_harness and must be just as complete: pass back each quoted item's config (or design) once the user has confirmed it, and the same ship_to.
Schema valid · SHA-256 96174837c9a9…
View input schema
{ "type": "object", "properties": { "items": { "minItems": 1, "maxItems": 40, "type": "array", "items": { "type": "object", "properties": { "design": { "description": "A complete design code or configurator URL (e.g. \"https://acornharness.com/?k=22&l=350&g=16&a=st&b=ra-d&c=red.black.green.yellow&t=1&q=1\"), from a previous quote or pasted by the user. With it, no other field is required; any field given overrides it.", "type": "string", "maxLength": 2000 }, "connector": { "description": "Required: ask the user if they haven't said; never guess it. Connector family: \"xt30\" = XT30 (power only, 2 pins); \"xt30-22\" = XT30(2+2) (power + 2 signal pins); \"xt30-gh\" = XT30 + JST GH (power + signal on gh). The same on both ends, except that end B can be unterminated (end_b) or, on \"xt30-22\", move its signal pair to a JST GH plug (end_b_gh). Every plug is the female, cable-side part (XT30U-F / XT30(2+2)-F with gold contacts; JST GH GHR-02V-S housings), which mates with the male headers on batteries, ESCs, boards and actuators. There is no gender option.", "type": "string", "enum": [ "xt30", "xt30-22", "xt30-gh" ] }, "length_mm": { "description": "Required: ask the user if they haven't said; never guess it. Wire length in mm, 30–3000, rounded to the nearest 5 mm. Wire only, measured between the rear faces of the plugs (to the wire tips on a pigtail). 1 in = 25.4 mm.", "type": "number", "minimum": 30, "maximum": 3000 }, "power_gauge": { "description": "Required: ask the user if they haven't said; never guess it. Power wire gauge in AWG: 14 (up to ~30 A), 16 (up to ~22 A), 18 (up to ~16 A). Signal wire gauge is signal_gauge.", "type": "number", "enum": [ 14, 16, 18 ] }, "end_a": { "description": "Required: ask the user if they haven't said; never guess it. How the wires leave end A's plug: \"straight\" = wires exit inline with the plug; \"ra-up\" = power wires bend 90° up, as drawn in the rear (wire side) view; \"ra-down\" = power wires bend 90° down, as drawn in the rear (wire side) view. In that rear view the power pins are on the left, the signal pins on the right. End A always has a plug. Ask about end A and end B separately: \"right angle on one end\" still leaves which way, and what the other end is.", "type": "string", "enum": [ "straight", "ra-up", "ra-down" ] }, "end_b": { "description": "Required: ask the user if they haven't said; never guess it. How the wires leave end B's plug: \"straight\" = wires exit inline with the plug; \"ra-up\" = power wires bend 90° up, as drawn in the rear (wire side) view; \"ra-down\" = power wires bend 90° down, as drawn in the rear (wire side) view; \"unterminated\" = no plug: wires stripped 6 mm and tinned, for screw terminals or soldering. In that rear view the power pins are on the left, the signal pins on the right. \"unterminated\" makes a pigtail. Ask about end A and end B separately: \"right angle on one end\" still leaves which way, and what the other end is.", "type": "string", "enum": [ "straight", "ra-up", "ra-down", "unterminated" ] }, "colors": { "description": "Optional; defaults red (+), black (−), green (signal 1), yellow (signal 2). Power wires are red or black; signal wires green or yellow. The result's defaults_applied lists any color left out: tell the user.", "type": "object", "properties": { "power_pos": { "description": "Power + wire, red or black. Default red.", "type": "string", "enum": [ "red", "black" ] }, "power_neg": { "description": "Power − wire, red or black. Default black.", "type": "string", "enum": [ "red", "black" ] }, "signal_1": { "description": "Signal 1 (pin 1), green or yellow. Default green. Signal-pair connectors only.", "type": "string", "enum": [ "green", "yellow" ] }, "signal_2": { "description": "Signal 2 (pin 2), green or yellow. Default yellow. Signal-pair connectors only.", "type": "string", "enum": [ "green", "yellow" ] } }, "additionalProperties": false }, "twisted": { "description": "Optional, \"xt30-22\" and \"xt30-gh\" only: twist the signal pair (recommended for CAN). Default true; tell the user if you rely on it.", "type": "boolean" }, "swap_signals": { "description": "Optional, \"xt30-22\" and \"xt30-gh\" only: cross the signal pair, end A pin 1 to end B pin 2 and 2 to 1 (e.g. to swap CAN H/L). Needs signal pins on end B (a plug, or end_b_gh). Default false (straight through); tell the user if you rely on it.", "type": "boolean" }, "end_b_gh": { "description": "Optional, \"xt30-22\" only: end B's signal pair goes to its own JST GH 1.25 mm 2-pin plug, and end B's power to a 2-pin XT30 (or tinned leads if end_b is \"unterminated\"). End A keeps the XT30(2+2). Default false (end B is an XT30(2+2) like end A); ask if the user mentions JST GH.", "type": "boolean" }, "signal_gauge": { "description": "Optional, \"xt30-22\" without end_b_gh only: signal wire gauge in AWG, 24 or 30. Default 24; 30 is thinner and more flexible. Any JST GH plug (\"xt30-gh\", or end_b_gh) is always 30 AWG, to fit the GH contacts. Ask if the user mentions signal wire size; tell the user if you rely on the default.", "type": "number", "enum": [ 24, 30 ] }, "quantity": { "description": "Required: ask the user if they haven't said; never guess it. How many of this design, 1–5000. Volume discounts count every harness in the order.", "type": "integer", "minimum": 1, "maximum": 5000 } }, "additionalProperties": false }, "description": "1–40 wire harness designs. Volume discounts count every harness across all items." }, "ship_to": { "description": "Two-letter ISO country code the order ships to, e.g. \"US\", \"CA\", \"GB\", \"DE\", \"JP\", \"AU\". Omitted = US. Ships to the US and 55 more countries; list_options has every country. Shipping is priced for it, and checkout only accepts an address there.", "type": "string", "pattern": "^[A-Za-z]{2}$" }, "email": { "description": "Buyer's email, only if they gave it: prefills checkout; the receipt, invoice and tracking go there.", "type": "string", "maxLength": 254, "format": "email", "pattern": "^(?:[A-Za-z0-9_'+\\-]+\\.)*[A-Za-z0-9_'+\\-]*[A-Za-z0-9_+-]@(?:[A-Za-z0-9][A-Za-z0-9\\-]*\\.)+[A-Za-z]{2,}$" }, "reference": { "description": "Buyer's PO number or note, echoed back on the order.", "type": "string", "minLength": 1, "maxLength": 200 }, "idempotency_key": { "description": "Any unique string. Retrying with the same key and the same items returns the same order instead of a second one.", "type": "string", "minLength": 1, "maxLength": 200 } }, "required": [ "items" ], "$schema": "http://json-schema.org/draft-07/schema#" }
Connections
streamable-http
https://acornharness.com/mcp